Kenwood eXcelon Ported 2-ohm enclosure with two 12" subwoofers
ported enclosure with two 12" subwoofers
wired for 2 ohms total impedance
polypropylene cone with diamond array pattern
stress controlled spider
5/8" MDF construction with 3/4" MDF baffle
power handling: 600Ws RMS (2000 watts peak)
total impedance: 2 ohms
frequency response: 29-300 Hz
spring-post terminals accommodate up to 8-gauge wire
can be installed as front-, rear-, or down-firing
steel-mesh grilles included
dimensions: 35-3/4"W x 15-13/16"H x 15-13/16"D1 x 12-9/16"D2
warranty: 2 years
mono subwoofer amplifier
300 watts RMS x 1 at 4 ohms
500Ws RMS x 1 at 2 ohms
CTA-2006 compliant
Class-D amplifier design
frequency response: 20-200 Hz
variable low-pass filter: 50-200 Hz, 24 dB/octave
variable bass boost: 0-18 dB at 40 Hz
selectable subsonic filter: 25 Hz, 24 dB/octave
wired remote level control included
preamp and speaker-level inputs
speaker wire adapters included
speaker-level inputs can handle up to 12V (36W)
signal-sensing turn-on with speaker-level input
wiring and hardware not included with amplifier
8-gauge power and ground leads recommended
fuse rating: 30A x 2
dimensions: 8.4"W x 2.09"H x 5.95"D